Stihl MS194T MS 194 T Gas Chainsaw

The STIHL MS 194 T gas chainsaw is a powerful professional arborist saw that is equally impressive for crown maintenance as well as in the removal of deadwood and suckers and water sprouts. Specialists in tree maintenance can carry out maintenance tasks effectively with this gas-driven chainsaw. The compact design of the STIHL MS 194 T chainsaw and its low weight enable you to work efficiently even in confined spaces.

The powerful STIHL 2-MIX engine ensures high cutting performance with low fuel consumption. The STIHL 1/4'' PM3 saw chain enables fine cuts and precise work. The STIHL Ematic system also supports the targeted supply of oil to the bar and chain, meaning you can work effectively while conserving oil. A practical, fold-out hook is used to attach the suspension cable when lowering the chainsaw and for securing it.

The extensive benefits of this chainsaw include the STIHL anti-vibration system, which minimises vibrations from the engine and power tool, thereby protecting your muscles and joints.

WARNING: This special chainsaw is only designed for specialists trained in tree maintenance. Using this tool without proper training may lead to serious injury.

SIDE-MOUNTED CHAIN TENSIONING
FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

MANUAL FUEL PUMP
FOR FEWER STARTING STROKES. The manual fuel pump reduces the number of strokes required to start the power tool, making the start-up process quicker and easier This is particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting. This will ensure that there is enough petrol in the carburettor when starting.

COMPENSATOR
REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

TOOL-FREE FUEL CAP FOR OIL AND FUEL TANKS
QUICK AND EASY TO USE. With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure.

STIHL FOUR-CHANNEL TECHNOLOGY
FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

STIHL 2-MIX ENGINE
FOR FEWER STARTING STROKES. The manual fuel pump reduces the number of strokes required to start the power tool, making the start-up process quicker and easier This is particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting. This will ensure that there is enough petrol in the carburettor when starting.

STIHL ANTI-VIBRATION SYSTEM
FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

11372000308 - MS 194 T CHAINSAW 14"

• 00007929171 - BAR SCABBARD 3005 12-14" MINI
• 11370113051 - MS 194 T CHAINSAW
• 30050083909 - GUIDE BAR 14" 3/8 .043 L01
• 36100020050 - 61PMM350E 3/8P .043G 50DL

11372000309 - MS 194 T CHAINSAW 16"

• 00007929173 - BAR SCABBARD 3005 16-18"
• 11370113051 - MS 194 T CHAINSAW
• 30050083913 - GUIDE BAR 16" 3/8 .043 L01
• 36100020055 - 61PMM355E 3/8P .043G 55DL

11372000393 - MS 194 T CHAINSAW 12"

• 00007929171 - BAR SCABBARD 3005 12-14" MINI
• 11370113051 - MS 194 T CHAINSAW
• 30050083905 - GUIDE BAR 12" 3/8 .043 L01
• 36100020044 - 61PMM344E 3/8P .043G 44DL