Wall Thickness of legs on the Revo 24|36 is 80% heavier compared to the Revo 18|36.
Redesigned banjo features a more compact design, 45° cutout & wider base.
Having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.
And YES, this amazing control panel comes standard with the Revo 24|36
- Motor: Induction, 1725 RPM, 3HP, 220V, 60Hz
- Phase: 1-Phase Input, 3-Phase Output
- VFD: Delta S1 Variable Frequency Drive
- Weight: 610.00 LBS
- Width: 40.00 (in)
- Height: 36.00 (in)
- Depth: 50.00 (in)
Recommended Breaker Size15 Amp
Two Ergonomic Control Panel PositionsHigh/Low
Drive BeltPoly-Groove With EZ Access
Tailstock Quill4-1/2″, Engraved, Self-Ejecting
Floor Top Spindle Center44-1/2″
Front BearingTPI Taiwan 6307LLU
Rear BearingTPI Taiwan 6205LLU
Spindle Index #14/36/48 with Lock
Distance Between Centers36″
Headstock Through-Bore⅜″
Toolrest Post Size1″
Spindle Size1-1/4″ x 8 TPI RH
Floor To Bed32-1/2″ with Pads
Maximum Outboard Turning Diameter38″ (w/ Optional 20″ Extension Installed)
Swing Over Banjo19-3/4″
Accepts Vacuum ChuckYes
Face Plate3″ Diameter
Tool Rest12″
Steel BedASTM A36
Bed Gap50mm
Headstock SpindleMT2 Taper Hardened To 40 Deg. HRC
Live Center Threads3/4″ - 10 UNC
Tailstock Quill#2 MT
Swing Over Bed24″
RPM High135-3500
RPM Low50-1300
Plug6-15P
Dimensions (W x D x H)60″ x 26″ x 52-1/4″
Shipping Weight610 lbs
Shipping Dimensions (L x W x H)36″ x 40″ x 50″
Videos Hide Videos Show Videos
- Weight: 610.00 LBS
- Width: 40.00 (in)
- Height: 36.00 (in)
- Depth: 50.00 (in)
- Status: Special Order
