Freud LU90M010 10 Thin Stock Non-Ferrous Metal Blade

This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5 degree hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

• Premium TiCo HI-Density Carbide Non-Ferrous Blend for Maximum Performance
• Freud-Made TiCo Carbide specifically designed to cut nonferrous metals extends tooth life
• Positive Hook Anglesproduce a smoother cut with less material distortion and burr free cuts
• Silver Ice Coating resists corrosion and pitch build-up

• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8in. Max.
• Machine Use: Miter Saw,Table Saw,Radial Arm Saw,Portable Table Saw
• Materials: Thin Aluminum And Other Non-Ferrous Metal

• Diameter
  
  10in.
• Teeth
  
  100
• Grind
  
  TCG
• Arbor
  
  5/8in.
• Hook Angle
  
  5 degree
• Kerf
  
  .110in.
• Plate
  
  .087in.

• Weight: 5.00 LBS