For performing work like a professional, the Einhell 1/4" (6.35 mm) cordless impact driver kit 4510064 (TE-CI 18/1 Li-solo) is the tool for the ambitious hobby DIY enthusiast. With 1,240 in/lbs (140 Nm) of torque, the cordless impact driver not only effortlessly drives in large or long screws, the cordless impact driver is suitable for a whole range of jobs in the home, the workshed and especially the garage. Unlike impact drill drivers, the impact driver from Einhell helps reduce physical strain on the user: the low reverse torque ensures that less effort is required compared to working with an impact drill driver. Also, the Einhell 4510064 (TE-CI 18/1 Li-solo) cordless impact driver is a member of the Power X-Change family and can therefore be used with any situation without any bothersome power cords. The same battery for everything, a concept which means lots of other tools can also be operated with the same battery. Thanks to its short, light-weight design and ergonomic Softgrip surfaces, tireless working is assured. The cordless impact driver is equipped with 1/4" (6.35 mm) hexagonal fitting for optimum operation with impact-resistant bits. The no load speed is 2,300 RPM. The electronic speed control is finely adjustable for delicate operation. With the three power LEDs, Einhell has designed a tool which provides good all-round illumination. An aluminum housing and rubber supports protect the housing and help make it a rugged machine. A practical belt clip is provided for efficient and safe operation. This kit includes a 2.0 Ah battery, charger and soft bag.
- Member of the Power X-Change family
- Practical belt clip for efficient and safe operation
- Hammer screwdriver - for effortlessly tightening large/long screws
- Low reverse torque reduces strain on the wrists during operation
- Short, lightweight design with ergonomic softgrip surfaces
- 1/4" hex. bit (6.35 mm) (Recommendation: impact-resistant bits)
- Speed control for fine adjustment on delicate jobs
- 3 powerful LED included for good all round illumination
- Rugged aluminum housing and rubber supports for protection
- Includes a 2.0 Ah battery, charger and soft bag
- Weight: 7.80 LBS
- Width: 4.88 (in)
- Height: 11.00 (in)
- Depth: 16.88 (in)
Motor voltage18V | 2.0 Ah |Li-Ion
Motor typeBrush motor
No load speed0 - 2,300 RPM
Impacts per minute0 - 2,900 IPM
Tool collet (hex.)1/4" (6.35 mm)
Type of bit interlockMechanic locking sleeve
Max. torque1,240 in/lbs (140 Nm)
Product weight3.1 lbs
Videos Hide Videos Show Videos
- Weight: 7.80 LBS
- Width: 4.88 (in)
- Height: 11.00 (in)
- Depth: 16.88 (in)
- Voltage: 18V
- Power Type: Cordless
- Configuration: Kit