UVPoxy has been formulated with a simple 1:1 mix ratio and is designed for tabletops, wood finishing, and fluid art. It is a high-performance, two-component, water-clear epoxy system that resists yellowing caused by the sun and other UV sources.
Use UVPoxy by itself for a water-clear finish or add our Liquid, Metallic, or Glitter pigments to create custom colors and effects. It is self-leveling and can quickly be built up in 3.2 mm (1/8") layers.
With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.
Used to Create:
- High-Gloss Topcoat for Woodworking Projects
- Epoxy Inlays
- Fluid Art Projects
- Decorative Countertops
Perfect for Coating
With a maximum thickness of ⅛”, UVPoxy is perfect for use as a self-leveling, high-build finish on epoxy woodworking and art projects.
Resists Yellowing
UVPoxy is specially formulated to resist yellowing caused by sunlight and other ultraviolet light sources. While UVPoxy has been formulated to resist yellowing, it is not recommended for permanent outdoor applications.
Water Clear
UVPoxy cures to a water-clear, high-gloss finish that is compatible with many substrates. UVPoxy will self-level to approximately 1/16" if the resin is allowed to run over the edges of the workpiece.
Create Beautiful Designs
UVPoxy allows woodworkers and artists to create pieces that are as beautiful as they are functional. Add Liquid Color Pigments, Metallic Color Pigments, and Polyester Color Glitters to achieve stunning results.
Mixing
In a clean, dry container combine (by volume) 1 part resin with 1 part hardener and mix thoroughly for 2-3 minutes. Add Liquid, Metallic, or Glitter pigments as desired and mix until evenly dispersed.
Application
Working area should be clean, dry, and free of dust. Settling dust can cause blemishes on the glossy surface. Pour UVPoxy onto the prepared surface and spread evenly. Use of a V-notched spreader is recommended to achieve a uniform finish at the desired thickness. A light pass with a torch can help release bubbles at, or near, the surface. UVPoxy can be applied up to 3.2mm thick (1/8”) per coat, using as many layers as needed to achieve the desired thickness. For best adhesion between layers, wait until the first layer is tacky to touch to apply another layer. If the first layer is already fully set to touch, sand with 220 grit sandpaper and wipe down before applying another layer. Recommended for indoor applications only.
View Technical Data Sheet (TDS)
UVPoxy® SDS Resin - English (CA)
UVPoxy® SDS Hardener - English (CA)
- Weight: 1.54 LBS
Videos Hide Videos Show Videos
- Weight: 1.54 LBS
