Diablo D1260CF 12 In. X 60 Tooth Steel Demon Cermet II Saw Blade For Metals And Stainless Steel

Diablo D1260CF 12 in. x 60 Tooth Steel Demon Cermet II Saw Blade for Metals and Stainless Steel
Diablos Steel Demon Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness for superior wear and life delivering up to 25X longer life, 50X cooler cuts and 10X faster cuts when compared to standard grinding discs. Featuring a special Triple Chip Grind and Perma-SHIELD coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks. A controlled cutting action produces larger chip sizes that generates less dust and airborne contaminates. The ability to cut through both metals and stainless steels eliminates the need for individually dedicated saw blades, offering a one-blade solution for the ultimate metal cutting performance and an unmatched value.

FEATURES

• Cermet II (Ceramic and Metallic) teeth deliver a more efficient and productive metal cutting solution through high heat tolerance and increased hardness for superior wear
• fewer blade changes and up to 25X longer life versus standard grinding discs
• Up to 50X cooler cuts with a circular saw blade when compared to a grinding disc that increases temperature of steel by up to 500 degrees. Grinding discs increase the temperature enough to permanently discolor the steel.
• Up to 10X faster cuts with a circular saw blade for maximum productivity and efficiency
• resulting in up to 60 seconds faster cuts in both metals and stainless steels versus standard grinding discs
• Triple Chip Cutting action reduces sparks and the possibility of needing hot permits
• Optimized blade design reduces wandering and deflection of metal
• creating precise cuts that require virtually no re-work
• Advanced Laser Cut Stabilizer Vents trap noise and vibration for maximum stability
• keeping the blade cool for straight
• accurate cuts
• Tri-Metal Shock Resistant Brazing
• a three-metal brazing system
• allows Cermet II teeth to withstand extreme impact for maximum durability
• Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut
• accuracy and long cutting life in cordless or corded saws
• Perma-SHIELD coating resists heat build-up by protecting the blade against gumming and corrosion
• Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation when in use
• Circular saw blades create a controlled cutting action resulting in larger chip sizes that generates less dust and airborne contaminates versus standard grinding discs
• Cuts 1/8-1/2 wall thickness in steel studs
• angle iron
• flat bar
• channel
• and EMT conduit
• Cuts 1/4-1 wall thickness in plate and bar stock
• Cuts 1/2"-2 diameter threaded rod
• Use with a dedicated low RPM metal cutting saw
• Clamp down your materials
• Use right tooth count to thickness of material
• Use correct cutting speed and let the tool do the work (do not cut too slow)
• Max RPM: 1800

APPLICATIONS

• Metalworking
• Use the correct tool|This blade requires a low RPM metal cutting saw. Do not use this blade on an abrasive saw or standard miter saw. Using this blade at a higher speed than the stated RPM will result in rotation that is too fast for the blade to be effective and could damage the blade. [https://images.freudnation.com/res/img/diablo/tools/tools_low_rpm_metal_saw.png],Secure the work piece|It is especially important to secure the workpiece when cutting metal. Vibration during the cut will degrade performance and could result in poor quality cuts, loss of teeth and reduction in blade life. Clamp the material down to prevent movement or vibration while cutting.Generally avoid bundling materials you are cutting.For steel studs, cut with the open channel down. If you are cutting two studs at once, interlock the channels to prevent vibration.,Cut at the correct speed|For metal cutting with a circular saw blade, it is important not to cut too slowly. This will create additional heat that can reduce cut quality. Apply even constant pressure letting the tool do the work.

Ideal For: Studs & Tubing (Wall thickness 1/8" (11 gauge) min 1/2" max); Plates & Bars (Thickness 1/4" (11 gauge) min 1" max); RODS (Diameter 1/2" min 2" max) - Steel Studs, Angle Iron, Black Iron Pipe, Unistrut, Tubing, EMT Conduit, Flat Bar, All-Thread, Channel
Application: Metal Cutting

• Weight: 1.00 LBS