Power and precision in the palm of your hand
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.
- When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
- Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
- The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
- Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
Includes:
- 75" Guide Rail FS 1900
- Hex key 5mm
- HW standard saw blade W36
- Plug it-power cable (4m)
- Sight window
- Splinterguard
- Systainer SYS3 M 437
- Weight: 13.60 LBS
Idle engine speed1 350 - 4 400 RPM
Cable length4.00 m
Saw blade diameter8-1/4” (210 mm)
Drive type120 VAC
Cutting depth at 45°2-1/8” (55 mm)
Dust extraction connection dia.1-1/16"/1-7/16" (27/36 mm)
Power consumption1 600 watt
Cutting depth0" - 3” (0 - 75 mm)
Angular range0 - 47 °
Cable length13.12 ft
Cable length13.123 ft (4 m)
Videos Hide Videos Show Videos
- Weight: 13.60 LBS
