The definitive midi-lathe, Lagunas REVO 12|16 encapsulates the prestige of Laguna in a small package. Featuring a Pulse Width Modulation system motor to maintain consistent torque at any speed, one step cam-action belt change with magnetic door housing, and a luxury banjo w/45 chamfered edge.
The 1216 controls the 1hp DC motor using pulse width modulation. A big problem with DC motor control is torque in the low speeds, and you will find many MIDI lathes with the lowest speed of 250RPM and higher because of this. This is because the cost effect controllers introduce resistance into the voltage to limit the power, which reduces the speed but also reduces the torque at the same rate. PWM will deliver full torque across the entire speed range. This allows for tremendous torque in low speeds which is helpful when roughing and precision work. This also allows for outboard turning up to a 16 bowl on a mid-sized lathe.
- Weight: 125.00 LBS
Electrical Requirements100V-1ph-60Hz
Recommended Breaker Size110V û 15 Amp
Speed Range High650 û 3500 RPM
Speed Range Mid325 û 1750 RPM
Speed Range Low50 û 525 RPM
Distance Between Centers15.5"
Swing Over Bed12-1/2"
Swing Over Banjo9-1/2"
Max Outboard Swing16"
Spindle Bore3/8"
Spindle Taper1" x 8 TPI (Both Ends)
Indexing24 Positions With Lock
Drive BeltPoly-V Belt 6 Grooves
Tail Stock Quill Travel2-1/2"
Tail Stock TaperMT2
Bed Length29.4"
Tool Rest Length6"
Tool Rest Post Diameter1"
Faceplate Diameter3"
Floor To Bed Height6.7 No Pads
Floor To Spindle Center13" No Pads
Overall Size (L x W X H)35.8" x 14.6" x 20.5"
Net Weight118 lbs
Shipping Weight125 lbs
Shipping Dimensions37" x 15" x 21"
Videos Hide Videos Show Videos
- Weight: 125.00 LBS
