iVAC TP-NA Pro Tool Plus
- The Tool Plus unit is used to identify the powered on state of its associated power tool.
- The Tool Plus is physically clamped to the power cord of the power tool.
- The method of detecting the status of the power tool is by means of sensing the magnetic field around the power cord when the power tool is turned on or off.
- The Tool Plus is powered by +5VDC. This power is obtained from either a UL FCC approved AC to DC 5volt USB adaptor, or an associated iVAC Pro System unit.
- If a Tool Plus unit is in the Auto Mode when the associated power tool is powered on, the Tool Plus unit will transmit an instruction, by means of a digital wireless signal, to the iVAC Pro Switch instructing it to turn on and apply power to the Dust Collector.
- When the power tool has been turned off, the Tool Plus units will transmit an instruction to the iVAC Pro Switch telling it to turn off.
- The range for radio communications between the Tool Plus and the iVAC Pro Switch is forty feet.
Includes:
- Plastic housing is 3.75 x 2.5 x 1.75 (95 x 63.5 x 44.5 mm) ABS 94V0 plastics
- Input power cord is 10 ft (3 m) long with a USB power plug
- Three Modes of operation: AUTO OFF - ON
- Programmable System Address
- Programmable Tool Address
- Preset able Sensitivity
- Activity LED
- Weight: 2.00 LBS
Range40 ft.
Maximum ambient operating temperature 30C
Active Sense Current, Adjustable 0.5Amps to 3.5Amps
Videos Hide Videos Show Videos
- Weight: 2.00 LBS
