Designed to fit your hand with a low profile
Most jigsaws have a hard time staying on course. Hard material and curves can easily cause the blade to deflect, resulting in time consuming re-cutting or sanding. Trion jigsaws are designed with adjustable carbide-tipped jaws that work with the blade clamping system and back-up bearing for triple blade guidance that keeps the blade perpendicular to the shoe at all times, even on curves. The barrel grip PS 300 is designed to fit your hand with a low center of gravity.
Carbide guidance system keeps the blade perpendicular to the shoe for improved cut results, even in thick stock. Zero clearance splinterguard are solid one-piece inserts that are cut with the blade mounted in the machine for a clean, splinter-free cut. Dust extraction channels integrated in the base plate coupled with a clear chip deflector a rear dust extraction port provide for cleaner work area. MMC electronics provide soft start to reduce start up jolts, variable speed to match the speed to the material, and constant speed under load.
Most jigsaws have a hard time staying on course. Hard material and curves can easily cause the blade to deflect, resulting in time consuming re-cutting or sanding. Trion jigsaws are designed with adjustable carbide-tipped jaws that work with the blade clamping system and back-up bearing for triple blade guidance that keeps the blade perpendicular to the shoe at all times, even on curves. The barrel grip PS 300 is designed to fit your hand with a low center of gravity.
Carbide guidance system keeps the blade perpendicular to the shoe for improved cut results, even in thick stock. Zero clearance splinterguard are solid one-piece inserts that are cut with the blade mounted in the machine for a clean, splinter-free cut. Dust extraction channels integrated in the base plate coupled with a clear chip deflector a rear dust extraction port provide for cleaner work area. MMC electronics provide soft start to reduce start up jolts, variable speed to match the speed to the material, and constant speed under load.
- Carbide guidance system
- FastFix
- Zero Clearance Splinterguard
- MMC Electronics
- Dual-Port Dust Extraction & Chip Deflector
- Variable stroke
- Non-Marring Sub-Base
- 13' Plug-It power cord
- Dual Bevel Base
- Barrel Grip Design
- Allows for quick, tool-free blade changes
- FastFix lever angles and opens the chuck for easy blade removal
- Solid one-piece Splinterguards are cut with the blade mounted in the machine
- This allows precise zero clearance for ultra clean cuts with no splinters or tearout
- Features soft-start, variable speed control so the blade speed matches the material; constant speed under load for consistent blade tip speed, and improved cut quality
- Use a combination of these for maximum dust control, when used with a CT dust extractor
- One straight plunge-action setting and three progressive orbital modes
- The non-marring, plastic sub-base allows you to work on finished material without concern for damage or marking
- Festool Plug-It system allows you to quickly switch between the jigsaw and just about any other tool, reducing downtime, and simplifying packing
- 45 dual bevel for angled cuts and a zero degree detent for perpendicular cuts
- A barrel grip design, preferred by most professionals
Includes:
- 2 X Saw Blade
- Splinterguard
- Weight: 10.28 LBS
Videos Hide Videos Show Videos
- Weight: 10.28 LBS
